Previous keyboard_arrow_left
Next keyboard_arrow_right
CARTOUCHE 20 BIG BLUE BOBINEE, 100 MICRONS
CARTOUCHE 20 BIG BLUE BOBINEE, 100 MICRONS

CARTOUCHE 20 BIG BLUE BOBINEE, 100 MICRONS

PR-SWS-2045-100
€24.96 Tax included
In stock
Livraison GRATUITE
Date de livraison estimée le 20/02/2026
Quantité :
Paiement sécurisé avec
  • Paiement sécurisé par Carte Bancaire
  • Paiement sécurisé avec Carte Visa
  • Paiement sécurisé avec Mastercard
Température de l'eau
4 ° C to 52 ° C
Compatibility
All Filter Body Format 20 "Big Blue
Filter media type
Polypropylene (PP) High density wound
Finesse of filtration
100 microns

placeholder.png

The cartridge AQUAPRO (Reference PR-SWS-2045-100) is the most robust and permeable pre-filtration solution for Big Blue 20 inch format systems. Combining a diameter of 4.5 "at a length of 50.8 cm, it is designed to handle solid water volumes. It is the reference choice for industrial facilities, farms or network heads of large buildings.

With 100 micron porosity, it acts as an ultra-powerful primary shield. It is specifically calibrated to stop the largest sediments such as large sand, thin gravel, important rust scales and channeling debris. Its pure polypropylene wire structure captures impurities throughout the thickness of the media without curbing the flow, ensuring a loss of almost non-existent pressure.

Key benefits

  • Big Blue 20 format ": offers the largest sediment retention capacity of the range, allowing to treat highly loaded waters with maximum autonomy.

  • Ultra-high flow (100 μm): Designed to provide minimal water strength, it is ideal for high flow drilling pumps or irrigation systems.

  • 100% polypropylene media: high purity material, certified for food contact, chemically neutral and guaranteed without any fiber release.

  • Depth Filtration: Unlike a washable sieve, the wire wound traps debris inside its structure, providing better protection against abrasive particles.

Head protection: sustainably preserves control valves, exchangers, industrial softeners and finer filtration cartridges (25 or 5 microns) located downstream.

placeholder.png

Maintenance & Recommendations

  • Replacement: It is recommended to replace the cartridge every 6 months. Visible accumulation of dark debris on the structure or drop in pressure points indicate that it is time to change it.

  • Recommended use: To be installed systematically in first position (network input) for the filtration of wells of wells, drilling or gross industrial process.

Installation: When mounting in the BIG BLUE bowl, make sure the vertical alignment to ensure perfect seal at the end joints.

Caractéristiques produit
Température de l'eau
4 ° C to 52 ° C
Compatibility
All Filter Body Format 20 "Big Blue
Filter media type
Polypropylene (PP) High density wound
Finesse of filtration
100 microns
Service pressure (bar)
Up to 6 bars
Dimensions
20 "BIG BLUE (approx 508 mm x 115 mm)
Maximum flow
About 90-120 liters / minute (depending on the installation)

Aucune information d’installation pour ce produit.

Entretien
Entretien simplifié

Un système conçu pour fonctionner de manière autonome avec un minimum d’entretien.

✓ Entretien quotidien
  • ✓ Aucune intervention nécessaire
  • ✓ Fonctionnement automatique
📅 Maintenance périodique
  • ✓ Contrôle annuel recommandé
📞 Service après-vente

Notre équipe technique reste disponible pour toute question ou intervention.
Hotline dédiée : 03 28 48 10 77

Loading...